Pump Gas Short Blocks
Basic Short w/Deluxe Package Shown
434SBC
$6,995
These Are The Same Exact Pieces That We Use In Our Highly Successful UltraStreet Engine Lineup. No Shortcuts. No Substitutions. Just The Highest Quality Parts With The Finest Precision Machine Work And Meticulous Assembly That We're Famous For!!
|
|
| Chamber Volume | 66cc | 72cc | 76cc |
| Flat Top Piston (-6cc) | 11.6 | 10.9 | 10.5 |
| Dished Piston (-20cc) | 10.1 | 9.6 | 9.3 |
| Ratio Computed With .040" Gasket | |||
|
|
- Footnotes:
- (1) Precision machined in USA to our custom specifications.
$395
| Camshaft Installation Package | $895 | ||||
| Includes: UltraStreet Steel Billet Solid Roller Cam, Cloyes Billet True Roller Timing Set w/Torrington Bearing, GM Performance Chrome Timing Cover, Cam Button And ARP Cam Bolts. Camshaft Installed and Degreed, Cam Button Shimmed To Installed Front Cover. | |||||
| Camshafts | |||||
| EC or HHR Hydraulic Roller Cam | $N/C | ||||
| Lifters | |||||
| Hi-Performance Solid or Hydraulic Roller Lifters. Call For Details. | From | $575 | |||
| Timing | |||||
| Cloyes 2 Piece Aluminum Timing Cover | Image Close | $175 | |||
| Jesel "Original 2 pc" Belt Drive | $1145 | ||||
| Deluxe Short Block Version Includes Camshaft Package | $1595 | ||||
| Includes: UltraStreet Steel Billet Solid Roller Cam, Cloyes Billet True Roller Timing Set w/Torrington Bearing, Cam Button & ARP Cam Bolts, GM Performance Chrome Timing Cover and Tavia Pointer, Hi-Performance Harmonic Balancer, SSRE/Moroso Custom Gold Irridited Street & Strip Oil Pan w/Windage Tray, Hi-Performance Oil Pump w/Tig-Welded Pick-Up. All Gaskets, Seals And Hardware. Completely Assembled With Camshaft Installed and Degreed. | |||||
| Camshafts | |||||
| EC or HHR Hydraulic Roller Cam | $N/C | ||||
| Harmonic Balancer | |||||
| SFI Approved Harmonic Balancer (Required At All Race Tracks) | $150 | ||||
| Lifters | |||||
| Hi-Performance Solid or Hydraulic Roller Lifters. Call For Details. | From | $575 | |||
| Timing | |||||
| Cloyes 2 Piece Aluminum Timing Cover | Image Close | $175 | |||
| Jesel "Original 2 pc" Belt Drive | $1145 | ||||
| Blocks | |||||
| Brodix Aluminum Block w/Steel Billet Caps, Special Head Stud Kit & Additional Machining (Slightly Less Peak HP) | $4500 | ||||
| HIP® Process (Hot Isostatic Pressing) For Increased Durability With Aluminum Blocks | $675 | ||||
| Crankshafts | |||||
| Manley 4340 Non-Twist Forged & Nitrided Crank | $125 | ||||
| Connecting Rods | |||||
| ARP 2000 Rod Bolts | $125 | ||||
| Manley H-Beam 4340 Steel Rods w/ARP 2000 Bolts | $300 | ||||
| Molnar Severe Duty 4340 H-Beam Rods w/ARP 2000 Asymmetrical Bolts | $400 | ||||
| Pistons - Pins - Rings - Bearings | |||||
| Total Seal TNT "Hellfire" Rings | $175 | ||||
| Calico Coated Bearing Package | $175 | ||||
| Additional Parts - Labor - Accessories | |||||
| Cometic MLS (Multi Layered Steel) Head Gaskets (.040/.045/.051 Thickness) | Each | $125 | |||
| Cometic MLS (Multi Layered Steel) Head Gaskets (.060/.066 Thickness) | Each | $145 | |||
| Heavy Metal Installed If Required. (Large Diameter Over 1" Slightly Higher) | Per slug | $95 | |||
| Weld Caps (if required) | Per cap | $35 | |||
| Cam Cut Counterweights (if required) | $Call | ||||
| SFI Heavy Duty Flexplate & ARP Bolt Package | $150 | ||||
| Boninfante Severe Duty SFI Flexplate & ARP Bolt Package | Image Close | $229 | |||
| Boninfante SFI Billet Flexplate & ARP Bolt Package | Image Close | $395 | |||
| PowerMaster Hi-Torque Mini Starter | Image Close | $229 | |||
| Painless Performance Hot Shot Relay Kit (Recommended for above starter) | $39 | ||||
| Lucas Break In Oil. Call For Viscosity Recommendation. Priced Per Quart. | Quart | $8 | |||