 |
|
Designed And Built For The Street Enthusiast That Believes "Some Is Good, More Is Better, And Too Much Is Just Enough!" This 632 UltraStreet Big Dawg Has Been Engineered To Deliver Incredible Race Engine Performance In A Reliable Pump Gas Friendly Package.
- Horsepower
- Torque
- Bore & Stroke
- Compression Ratio
- 900 @ 6200 RPM
- 845 @ 4600 RPM
- 4.600 x 4.750
- 10.75
- Dart Big "M" Tall Deck Block w/Splayed 4 Bolt Main Caps
- Callies 4340 Magnum Plus 4.750" Stroke Steel Crank
- Manley 4340 6.700" H-Beam Steel Rods w/ARP 2000 Bolts
- Clevite 77 "H" Series Main & Rod Bearings
- Ross/SSRE Custom 10.75-1 Forged Aluminum Pistons
- Speed Pro Plasma Moly Ring Set
- SSRE/Comp Cams Custom "Street Roller" Camshaft
- Comp Cams Solid Roller Lifters
- Cloyes Billet True Roller Timing Set w/Torrington Bearing
- Dart Pro 2 380 Fully CNC Ported Aluminum Heads
- 1.640" Manley Nextek Roller Springs
- 10° Titanium Retainers
- ARP Head Studs w/Parallel Ground Washers
- Harland Sharp Wide Body 1.7 Roller Rockers
- Chromemoly (1) Piece .080" Wall Pushrods
- FelPro HP Head Gaskets w/Pre-Flattened Steel Wire
- Merlin "X" Dominator Aluminum Intake
- SSRE/Moroso Pro Windage Series Oil Pan
- Moroso Race Prepped Oil Pump w/Tig Welded HD Pickup
- GM Performance Chrome Cover w/Billet Timing Pointer
- Hi-Performance Harmonic Balancer
- Complete Assembly Internally Balanced
- Individually Dyno Tested & Tuned
- Actual Dyno Sheet Provided
 |
 |
 |
|
 |
|
|
|||
| Carburetors & Fuel System: | |||||
| 1150 CFM Holley Dominator Carb Package includes: Carb, Phenolic Spacer, Aluminum AN Fuel Fittings, Studs & Gaskets. Dyno Tuned, Jetted and Calibrated on your engine. | |
$ 995 | |||
Holley Billet Gerotor Electric Fuel Pump • Up To 900HP • Includes Regulator |
|
$ 215 | |||
MagnaFuel ProStar 500 Billet Gerotor Electric Fuel Pump |
|
$ 399 | |||
| Ignition System: | |||||
| MSD Electronic Ignition Package includes MSD Pro Billet Locked Distributor w/Ford HEI-Style Cap, Bronze Gear, Custom MSD 8mm Wire Set. Dyno Tested and Calibrated on your engine. | |
$ 395 | |||
| MSD 6AL Electronic Ignition Box (Direct Plug-In For Our MSD Distributors) | |
$ 239 | |||
| MSD Blaster 2 Hi Performance Ignition Coil | |
$ 39 | |||
| Composite Distributor Gear (if required) | |
$ 95 | |||
| Shortblock Components: | |||||
| Brodix/Dart Aluminum Block w/Special Head Stud Kit & Additional Machining (Slightly Less Peak HP) |
| $ 4000 | |||
| Oliver Steel Billet Rods or Manley Pro Series I-Beam (Your Choice) | |
$ 995 | |||
| Calico Coated Bearing Package (Cam, Rods & Mains) | |
$ 150 | |||
| Cometic MLS (Multi Layered Steel) Head Gaskets | |
$ 95 | |||
| ATI SFI Approved Super Damper Balancer | |
$ 275 | |||
| Valvetrain Components: | |||||
Crower Severe Duty "Hippo" Roller Lifters w/Pin Oiling (Extended Lifter Life) |
|
$ 250 | |||
| SSRE Stud Girdle w/CNC Machined 2-Piece Valvetrain Stabilizer & Locking Hex Head Adjusting Nuts | |
$ 250 | |||
| T&D Pro Series Aluminum Shaft Rocker System | |
$ 1195 | |||
| New Crower Stainless Steel Shaft Rocker Arm System | |
$ 1395 | |||
| Nitrous Package (250+ HP Shot): | |||||
| Hellfire® Rings |
| $ 175 | |||
| Calico Coated Bearing Package (Cam, Rods & Mains) | |
$ 150 | |||
| Cometic MLS (Multi Layered Steel) Head Gaskets | |
$ 95 | |||
| Crower Severe Duty "Hippo" Roller Lifters w/Pin Oiling (Extended Lifter Life) |
|
$ 250 | |||
| ATI SFI Approved Super Damper Balancer | |
$ 275 | |||
|
|||||
| Accessories: | |||||
| SFI Heavy Duty Flex Plate & ARP Bolt Package |
| $ 125 | |||
PowerMaster Hi-Torque Mini Starter |
| $ 229 | |||
| Painless Performance Hot Shot Relay Kit (Recommended for above starter) | |
$ 39 | |||
Edelbrock Aluminum "High Volume" Mechanical Water Pump (Short or Long Version) |
|
$ 200 | |||
Meziere 55GPH Electric Water Pump |
| $ 375 | |||
| Moroso Vacuum Pump Kit w/Adjustable Relief Valve (Installed) | |
$ 895 | |||
SSRE Engraved Sheet Metal Valve Covers w/Breathers |
|
$ 350 | |||
| Custom Powder Coating Packages Available | |
$ Call | |||
 |
 |
|
If This Fuel Is Readily Available In Your Area, Our E85 Version Offers Much Greater HP And Torque Numbers Over Its' Gasoline Equivalent. E85 Fuel's Ability To Operate Without Detonation Under Much Higher Cylinder Pressure Allows Us To Significantly Raise The Compression Ratio And Slightly Alter Cam Timing To Produce These Dramatic Improvements. You Must Run An E85 Specific Carb Or Program Your Aftermarket Fuel Injection To Work With This Engine. |
|
|||||||||
 |
 |
|
For Those That Want Virually All The Power Of "The Big Dawg Classic" Without The Hassle Of Ever Having To Adjust Valves, The HHR Is For You! We Use Special "Proprietary Grinds" On Our Custom Hot Hydraulic Roller Cam Along With "Ultra Hi-Rev" Hydraulic Roller Lifters And Premium Alloy Valve Springs To Maintain Race Engine Performance With Hydraulic Roller Convenience. |
|
Comp Cams Custom "Proprietary Grind" Hydraulic Roller Cam
•
Crane High Rev Hydraulic Roller Lifters
•
Isky "Enduro Design" Premium Valve Spring Package
|
|
 |
|
| Components Subject To Change Due To Availability. |
Free Freight Applies To All Advertised Items Shipped To A Commercial Address In The 48 States. Residential, Out-Of-Area Or Lift Gate Service Subject To Additional Charges. Insurance & Handling Fees Apply. |
|
| Toll Free: 800.295.7142 • Phone: 631.218.7530 • FAX: 631.218.7540 |
|
| 35 Davinci Drive • Bohemia, NY 11716 |
| HOURS: Mon - Fri 9:00 a.m. - 6:00 p.m. EST |
|
| A Division Of Scott Shafiroff Race Engines & Components © 2000-2008 All Rights Reserved |
|